Full automatic perfect drink machinery equipments filling juice
production line and soda bottling equipment
hot drink
Totally enclosed monobloc (rinser, filler for hot liquid and
capper) is used for juice and tea drink with PET bottle and its
production capacity is 2000-20000BPH. It is controlled by PLC, MML
and frequency conversion, and equipped with filling temperature
control system and CIP automatic cleaning system. Adopt low vacuum
filling type to meet the technical requirement of various kinds of
juice and tea drink.
Advanced design:
1. All bearing blocks are adopting 3 bearings (2 deep groove ball
bearings and 1 thrust bearing). This type of bearing design can
make sure the smooth running of all bearing blocks, make sure both
horizontal and vertical applied force can play the advantage of all
bearings. All bearings have drain board and oil seal, so each
greasing pipe can grease directly to the pointed bearing, to extend
bearings’ lifetime efficiently.
2. Rinsing part’s water distributor adopts 6 springs as applied
force, it’s more balanced than the older 1-spring-type, avoids
water distributor from leaking.
3. Filling part adopts pressure filling method to realize high
speed and stable filling. Filling part is made of operating valve
and filling valve. When reaches certain filling level, operating
valve will close to ensure the accuracy of liquid level and no
water spray under high pressure. In this way, we solved problem of
filling level precision and water spray caused by high pressure.
4. Metal screw capping head is our company’s patented product.
According to design of glass bottle and metal screw cap, capping
head does reverse-capping when cap is above bottle, so it can point
correctly to the threaded inlet, then do forward-capping to tighten
caps. Forward and Reverse capping has it’s separate lifting curve,
due to the difference of force, it also applies different springs.
Additional bottle holding structure can avoid bottle from moving
during capping process, which greatly improves screwing
qualification yield.
Total height of capping head is 110mm, this design ensures strength
and alignment, guarantees the maximum balance of torsion. Easier
modify of torsion also multiple increase qualification ratio.
5. Each components of this filling machine can adjust its height
individually, unique design greatly improves the convenience of
adjustment and strength, make sure bottles can run smooth in high
speed. Main engineer has clutch protection device, anyplace occurs
default, whole machine will stop immediately, make sure default
won’t do any damage to filling machine.
6. Automatic oil greasing system is a very important components of
our filling machine. The oil distributor can distribute oil exactly
according to bearings size and model, complete system is controlled
by PLC’s User Interface, you can modify oil greasing amount
according to real operating situation also.
Main Technical Standards
| Model | RCGF14-12-4 | RCGF18-18-6 | RCGF24-24-8 | RCGF32-32-10 |
| Washinfillingcapping heads | 14-12-4 | 18-18-6 | 24-24-8 | 32-32-10 |
| Production capacity | 3000-4000 | 5000-6000 | 8000-12000 | 12000-15000 |
| Motor power | 5 | 5 | 6 | 8 |
| Size | 2180*1560*2300 | 2250*1670*2300 | 2800*1800*2300 | 4300*3500*2300 |
| Weight | 2800 | 3500 | 4500 | 5500 |
Juice Beverage Filling Machine Part photos:
Why Choose Us
1. Suitable all standard and irregular shapes and all sizes of
tablets, capsules, caplets etc.
2. Operation stable and lower noise
3. Bottle convey smoothly with dual-tracks conveyor
4. High speed filling with dual-nozzle
5. full-set protecting device keep operation steady and reliable
6. Touch screen Control System which is easy to control
8. Simple Straight Forward Operator Controls
9. On-Screen trouble description which is easy to solve
